Forklift Battery Charging and Safe Installation
Batteries utilized in forklifts are pricey pieces of machinery that are quite large weighing many pounds. The job of installing and charging these batteries is something which will have to be really planned out ahead of time so as to make sure that these methods are able to be done safely and correctly. Maintaining a sound charging procedure and correct handling could majorly increase the regular lifespan of a battery.
Standard Charging
It is essential not to connect the battery to the charger until it is at 20% capacity or lower. By charging the battery when it is more than 20 percent, the battery's lifespan could really be shortened. On about each 5th charge cycle, the charger must be set on the equalize or weekend setting, depending on which model of charger you are utilizing.
The charging cycle should never be interrupted. As soon as the charge cycle is done, you should avoid using the battery for a few hours. By practicing these methods, you would be able to help make sure that you get the maximum battery performance available.
Charger Maintenance
Make sure the charger is turned off prior to hooking up the battery to the charger. You then could connect the charger to the battery. This is a common mistake which could accidentally cause damage to both the forklift and the charger. It is also really important that the amperage of the battery should match that of the charger.
Do not ever allow the battery to completely discharge or to deep discharge. This would shorten the battery life greatly and can even prevent the charger from being able to start. If the battery charger reads that there is no battery activity, it would not start the charge cycle. If this situation occurs, a technician will need to be called in order to re-set the charger prior to charge being able to start.