Reach Forklifts
Space is generally at a premium in most distribution facilities or warehouse environments. The less space needed for aisles in which to operate machines, the more space overall you will have for the storage of goods and products. Thus, particular equipment has been intended to be utilized in very narrow aisles in order to maximize space and efficiency.
Reach Trucks
The specific reach lift truck has a mast that extends away from the body of the forklift. Usually, it is attached with a scissor mechanism. When the scissor is compacted or drawn in, the forklift becomes a lot narrower that the standard forklift.
Operator Position
Reach trucks are designed so the operator could stand while in operation of the machinery. This is a contrast to the typical forklift where the operator is usually sitting. The standing operation area reduces the amount of room required for the compartment of the operator, enabling the machine to achieve an even smaller profile overall.
Space Saving
With a reach truck, aisles can be made as narrow as 7 feet. Most typical forklifts need a minimum aisle space of roughly 11 feet; therefore, utilizing a reach truck provides roughly a savings of 5 feet on every aisle. When the warehouse is leased by the square foot basis, this is a large amount of space.
Unique Controls
A reach truck is normally steered using a rotating lever which is located on a platform beside the operator. There is one more lever used to control the mast and for extending the mast and also to control forward and reverse. These controls are somewhat different than typical forklift controls.
Load Capacity
Usually, the reach truck's load capacity is less than that of a standard forklift, depending on the model. This is largely due to the narrow design of the machine, which can lead to a really high center of gravity. When the load is raised and the mast is extended fully, this is actually true.