It is vital to utilize extra caution when using a rough terrain scissor lift. Drivers must be completely aware of the surrounding environment. Long booms on the machinery act as levers from the drive units center. Like for instance, a 6 inch bump can lead to a 3 foot bounce when the operator is at the driver controls. Take into consideration all other traffic nearby, as they might not be aware that you are moving. Plan your assent cautiously. Park the boom lift on a flat surface that has no mud or water. These areas cover deep potholes which could be probably cause the occupants to fall if the tires fell into the holes. If provided, use all of the outriggers, extended completely. Be certain to only use approved wooden chalk blocks.
Lots of lifts operate from a metal platform on the end of the boom. The extended booms act as levers from the center of the drive unit. A 6-inch bump could lead to a 3-foot bounce while you are at the driver controls. Consider all other traffic. They might not be aware that you are moving. Plan your assent. Park the boom lift on a flat surface free of any water or mud. These areas could cover deep potholes wherein the lift tires could fall, tipping the occupants. Extend all outriggers, if provided, completely. Place only approved wooden chalk blocks underneath the outrigger pads to prevent the unit from moving.
A serious danger for lift operators is overhead power lines. This is due no matter what type of lift is used. Like for instance, if the platform operator is not being aware, or if the platform is being controlled by employees on the ground that is not able to accurately access nearness to wiring and thus, either the worker or the platform itself can be easily brought into contact with electrical wires. The employee might be electrocuted unfortunately unless correctly insulated.